cex to dex

[justin0990]

can someone tell me how to this plz and thanks

 

[Irving]

If u do It worn u can get a semi Brick

 

[justin0990]

If u do It worn u can get a semi Brick

ok thanks but can u do more on dex ?

 

[Irving]

ok thanks but can u do more on dex ?

yes you can rtm better also do plats an dmore ................ etc.

 

[RegardModz]

Here You Go! Tried My Best To Explain

1) On your 3.55 cfw install and run the eid key dumper.pkg.
2) Once your back to the XMB, open blackb0x and retrive your eid_root_key from dev_hdd0/tmp/.
3) Now install the 4.21 rebug.
4) Install and run the rebug toolbox.
5) Now export flash to file, make sure your USB is in the right slot.
6) Install OpenSSL on your computer and rename the installation folder to OpenSSL not OpenSLL - Win32.
7) Put your NORBIN file which you got from the 'export flash' and your eid_root_key into the c2d folder.
8) Rename the NORBIN file to flashCEX.bin and add .bin to your eid_root_key.
9) Open CMD in that directory. Type the following: c2d.exe eid_root_key.bin flashCEX.bin flashDEX.bin 82
10) Press enter and you should have another file called flashDEX.bin.
11) Rename the flashCEX.bin to your original CEX dump to CEX-FLASH.EID0.NORBIN (16mb) or CEX-FLASH.EID0.NANDBIN (239mb or 256mb)and then Rename your converted DEX dump to DEX-FLASH.EID0.NORBIN (16mb) or DEX-FLASH.EID0.NANDBIN (239mb or 256mb) and put them on the root of your USB and put in the right slot of your PS3.
12) Open rebug toolbox and rewrite the target ID in flash then click yes to both. Reboot your PS3, go back to rebug toolbox and click swap lv2 kernal and it'll reboot and your on DEX.

 

[Irving]

Here You Go! Tried My Best To Explain

1) On your 3.55 cfw install and run the eid key dumper.pkg.
2) Once your back to the XMB, open blackb0x and retrive your eid_root_key from dev_hdd0/tmp/.
3) Now install the 4.21 rebug.
4) Install and run the rebug toolbox.
5) Now export flash to file, make sure your USB is in the right slot.
6) Install OpenSSL on your computer and rename the installation folder to OpenSSL not OpenSLL - Win32.
7) Put your NORBIN file which you got from the 'export flash' and your eid_root_key into the c2d folder.
8) Rename the NORBIN file to flashCEX.bin and add .bin to your eid_root_key.
9) Open CMD in that directory. Type the following: c2d.exe eid_root_key.bin flashCEX.bin flashDEX.bin 82
10) Press enter and you should have another file called flashDEX.bin.
11) Rename the flashCEX.bin to your original CEX dump to CEX-FLASH.EID0.NORBIN (16mb) or CEX-FLASH.EID0.NANDBIN (239mb or 256mb)and then Rename your converted DEX dump to DEX-FLASH.EID0.NORBIN (16mb) or DEX-FLASH.EID0.NANDBIN (239mb or 256mb) and put them on the root of your USB and put in the right slot of your PS3.
12) Open rebug toolbox and rewrite the target ID in flash then click yes to both. Reboot your PS3, go back to rebug toolbox and click swap lv2 kernal and it'll reboot and your on DEX.

yes warning if u do it wrong u can get a semi brick but that how u do it

 

[RegardModz]

yes warning if u do it wrong u can get a semi brick but that how u do it

Yeah, but it takes a minute to unbrick I doubt they would do it wrong, unless you're stupid.

 

[Irving]

Yeah, but it takes a minute to unbrick I doubt they would do it wrong, unless you're stupid.

true lol

 

[justin0990]

thanks ill give a shot if i brick ill let you know