Hello everyone
Cool your PS3 CFW to prevent it from heating up
I advise to apply this method on all PS3 in CFW as well SLIM as FAT.
You will avoid this way that it does not fall into Yload.
In this tutorial we will explain how to reduce the temperature of your PS3.
This method is applicable on CFW CEX or DEX from 4.60 to 4.81
We will use the functions of webMAN to manage the temperatures of your console.
Download webman 1.41.33 or higher
For CFW 4.65.2 Rebug or + you do not need to install webMAN, just activate it from the Rebug ToolBox.
For other CFWs, install the webman's PKG and launch the application.
If all goes well your PS3 reboot and you get a notification at the top right that what webman is loaded.
To access the setting functions you have 2 possibilities:
From the XMB (console interface)
From your internet explorer (Chrome, FireFox, Internet Explorer etc ...)
Depuir the XMB go in "webMAN Games", "My GAMES"
Then go to "webMAN Setup" or "webMAN configuration"
You will access the management interface, as below.
From the WEB interface, simply enter the IP address of your console in the WEB browser navigation bar.
Example: 192.168.0.86
Click on "Setup" or "Configuration"
Go down to the temperature section and indicate the desired temperature.
Check the box for webMAN to load the new data each time the console is started.
We recommend the following temperatures:
For FAT 70/72 °
For SLIM 68/70 °
Scroll down to save the newly saved data.
Click on "SAVE" or "SAVE"
To finish making a reboot of your PS3 by clicking "here"
Now webMAN will support temperature management when you start your console.
Credit:
Consolex
Cool your PS3 CFW to prevent it from heating up
I advise to apply this method on all PS3 in CFW as well SLIM as FAT.
You will avoid this way that it does not fall into Yload.
In this tutorial we will explain how to reduce the temperature of your PS3.
This method is applicable on CFW CEX or DEX from 4.60 to 4.81
We will use the functions of webMAN to manage the temperatures of your console.
Download webman 1.41.33 or higher
For CFW 4.65.2 Rebug or + you do not need to install webMAN, just activate it from the Rebug ToolBox.
For other CFWs, install the webman's PKG and launch the application.
If all goes well your PS3 reboot and you get a notification at the top right that what webman is loaded.
To access the setting functions you have 2 possibilities:
From the XMB (console interface)
From your internet explorer (Chrome, FireFox, Internet Explorer etc ...)
Depuir the XMB go in "webMAN Games", "My GAMES"
Then go to "webMAN Setup" or "webMAN configuration"
You will access the management interface, as below.
From the WEB interface, simply enter the IP address of your console in the WEB browser navigation bar.
Example: 192.168.0.86
Click on "Setup" or "Configuration"
Go down to the temperature section and indicate the desired temperature.
Check the box for webMAN to load the new data each time the console is started.
We recommend the following temperatures:
For FAT 70/72 °
For SLIM 68/70 °
Scroll down to save the newly saved data.
Click on "SAVE" or "SAVE"
To finish making a reboot of your PS3 by clicking "here"
Now webMAN will support temperature management when you start your console.
Credit:
Consolex
