CFW USERS ONLY!FOLLOW THESE STEPS CAREFULLY I AM NOT RESPONSIBLE OF ANY BRICKS FOLLOW AT YOUR OWN RISKS!STEPS:Start off here:
Spoiler:
INSTALL OFW ( OFFICIAL FIRMWARE ) 3.55.OFW 3.55
JAILBREAK YOUR PS3 WITH KMEAW CFW.KMEAW 3.55 CFW
Go to the computer, download and install these on the ps3:
Spoiler:
INSTALL QA FLAGS! ( TO DOWNGRADE WITHOUT E3 FLASHER )QA FLAGS.pkg
RUN QA FLAGS ( SHOULD GET BLACK SCREEN AND THEN GO BACK TO XMB )INSTALL EEID ROOT KEY DUMPPER!eid_root_key_dumpper
RUN THE EEID ROOT KEY DUMPPER. ( PS3 SHOULD SHUTDOWN. JUST TURN IT BACK ON )INSTALL MULTIMANMultiMan CEX
OPEN MULTIMAN AND USE THE DESKTOP FILEMANAGEROPEN dev_hdd0 THEN tmp
COPY EEID ROOT KEY TO USB BY THESE STEPS:
---------------------------------------------------------------------
PRESS X ONCE, THEN CIRCLE COPY IT
GO BACK TO dev_USB000 AND PRESS O AND PAST
---------------------------------------------------------------------
Once done with the steps above, download and install these on your CFW:
Spoiler:
INSTALL 4.21 REBUG ( MAKE SURE THERE IS NO DISK IN YOUR PS3 )REBUG 4.21 UPDATE
INSTALL REBUG TOOLBOXRebug Toolbox
RUN REBUG TOOLBOX AND LOCATE EXPORT TO FLASH ( MAKE SURE USB IS IN SECOND SLOT! )PRESS EXPORT TO FLASHPUT USB IN THE COMPUTER!
Now on the computer follow these steps carefully:
Spoiler:
NOW ON YOUR CUMPUTER, DOWNLOAD AND INSTALL c2d!c2d + openssl
EXTRACT THE c2d_openssl.rar TO C:/ AND INSTALL openSSLMAKE SURE YOU INSTALL IT TO THE C:/ DRIVE( RENAME THE FOLDER TO "openssl" )PUT YOUR EI_ROOT_KEY AND YOUR NOR/NAND DUMP IN THE c2d FOLDERRENAME THE DUMP TO "flashCEX.bin" AND ADD .bin TO EID_ROOT_KEY!--- YOUR FOLDER SHOULD LOOK LIKE THIS! ------
Click To View Folder
------------------------------------------------
OPEN A COMMAND PROMT IN THE c2d FOLDER BY PRESSING, (CTRL+SHIFT + right click > Open a command window here )TYPE THIS IN THE COMMAND PROMT!Click To View My CMD Box
OUTPUT SHOULD LOOK LIKE THIS!Click To View My Output In My CMD Box
TAKE YOUR 2 DUMPS AND RENAME ( flashCEX.bin + flashDEX.bin TO WHAT IS BELLOWIF YOUR REGULAR DUMP WAS A NORBIN FILE THEN:
------------------------------------------------
Rename your original CEX dump to CEX-FLASH.EID0.NORBIN (16mb)
------------------------------------------------
IF YOUR REGULAR DUMP WAS A NANDBIN FILE THEN:
------------------------------------------------
or CEX-FLASH.EID0.NANDBIN (239mb or 256mb)
------------------------------------------------
WHATEVER YOUR flashCEX WAS, CHANGE THE DEX DUMP TO THE RIGHT FILE TYPE!
------------------------------------------------
DEX-FLASH.EID0.NORBIN (16mb)
OR
DEX-FLASH.EID0.NANDBIN (239mb or 256mb)
Then place on USB001 (right slot)
------------------------------------------------
PUT THESE FILES IN THE c2d FOLDER ON THE ROOT OF YOUR USB!PUT USE INTO THE PS3 IN THE FARTHEST SLOT TO THE RIGHT NEAR THE BLURAY DRIVE!
Go back to ps3 follow theses steps now:
Spoiler:
OPEN REBUG TOOLBOX, AND BROWSE FOR "REWRITE TARGET ID IN FLASH"SHOULD LOOK LIKE THIS!: Click To View What It Looks Like On The PS3
A COUPLE OF WARNING BOXES WILL POP UP, CLICK YES ON BOTH!
CONVERT YOUR LVL2 KERNAL TO DEX"SHOULD LOOK LIKE THIS Click To View What It Looks Like On The PS3
YOU ARE NOW ON DEX ( debug ) 4.21 firmware
NOW TO GET ONLINE WITH 4.50ita!
Spoiler:
VIDEO IF NEEDED!
DOWNGRADE 4.21 DEX TO 3.55 DEX!USE THIS .PUP TO DOWNGRADE!\
3.55 DEX PS3 Downgrader
INSTALL PS3ita 4.50USE THIS .PUP TO INSTALL 4.50ita!
4.50ita DEX
INSTALL PS3ita MANAGER!PS3ita Manager
OPEN PS3ita MANAGER A.) WHEN OPENED, PRESS START
B.) GO TO NETWORK TOOLS
C.) RESTORE ORIGINAL CONSOLE ID
D.) QUIT PS3ita AND SIGN IN!
Credits
EREKTROTTER ( CEX2DEX 4.21 TUTORIAL! )FinalFantasyXIV ( Making The Downloads For OFW 3.55 and PS3ita 4.50 DEX )mango_knife ( Making a Video On How To Sign In With PS3ita ) Last edited by mastakiller; 01-25-2014 at 04:14 PM. Reason: Clean it up
Spoiler:
INSTALL OFW ( OFFICIAL FIRMWARE ) 3.55.OFW 3.55
JAILBREAK YOUR PS3 WITH KMEAW CFW.KMEAW 3.55 CFW
Go to the computer, download and install these on the ps3:
Spoiler:
INSTALL QA FLAGS! ( TO DOWNGRADE WITHOUT E3 FLASHER )QA FLAGS.pkg
RUN QA FLAGS ( SHOULD GET BLACK SCREEN AND THEN GO BACK TO XMB )INSTALL EEID ROOT KEY DUMPPER!eid_root_key_dumpper
RUN THE EEID ROOT KEY DUMPPER. ( PS3 SHOULD SHUTDOWN. JUST TURN IT BACK ON )INSTALL MULTIMANMultiMan CEX
OPEN MULTIMAN AND USE THE DESKTOP FILEMANAGEROPEN dev_hdd0 THEN tmp
COPY EEID ROOT KEY TO USB BY THESE STEPS:
---------------------------------------------------------------------
PRESS X ONCE, THEN CIRCLE COPY IT
GO BACK TO dev_USB000 AND PRESS O AND PAST
---------------------------------------------------------------------
Once done with the steps above, download and install these on your CFW:
Spoiler:
INSTALL 4.21 REBUG ( MAKE SURE THERE IS NO DISK IN YOUR PS3 )REBUG 4.21 UPDATE
INSTALL REBUG TOOLBOXRebug Toolbox
RUN REBUG TOOLBOX AND LOCATE EXPORT TO FLASH ( MAKE SURE USB IS IN SECOND SLOT! )PRESS EXPORT TO FLASHPUT USB IN THE COMPUTER!
Now on the computer follow these steps carefully:
Spoiler:
NOW ON YOUR CUMPUTER, DOWNLOAD AND INSTALL c2d!c2d + openssl
EXTRACT THE c2d_openssl.rar TO C:/ AND INSTALL openSSLMAKE SURE YOU INSTALL IT TO THE C:/ DRIVE( RENAME THE FOLDER TO "openssl" )PUT YOUR EI_ROOT_KEY AND YOUR NOR/NAND DUMP IN THE c2d FOLDERRENAME THE DUMP TO "flashCEX.bin" AND ADD .bin TO EID_ROOT_KEY!--- YOUR FOLDER SHOULD LOOK LIKE THIS! ------
Click To View Folder
------------------------------------------------
OPEN A COMMAND PROMT IN THE c2d FOLDER BY PRESSING, (CTRL+SHIFT + right click > Open a command window here )TYPE THIS IN THE COMMAND PROMT!Click To View My CMD Box
OUTPUT SHOULD LOOK LIKE THIS!Click To View My Output In My CMD Box
TAKE YOUR 2 DUMPS AND RENAME ( flashCEX.bin + flashDEX.bin TO WHAT IS BELLOWIF YOUR REGULAR DUMP WAS A NORBIN FILE THEN:
------------------------------------------------
Rename your original CEX dump to CEX-FLASH.EID0.NORBIN (16mb)
------------------------------------------------
IF YOUR REGULAR DUMP WAS A NANDBIN FILE THEN:
------------------------------------------------
or CEX-FLASH.EID0.NANDBIN (239mb or 256mb)
------------------------------------------------
WHATEVER YOUR flashCEX WAS, CHANGE THE DEX DUMP TO THE RIGHT FILE TYPE!
------------------------------------------------
DEX-FLASH.EID0.NORBIN (16mb)
OR
DEX-FLASH.EID0.NANDBIN (239mb or 256mb)
Then place on USB001 (right slot)
------------------------------------------------
PUT THESE FILES IN THE c2d FOLDER ON THE ROOT OF YOUR USB!PUT USE INTO THE PS3 IN THE FARTHEST SLOT TO THE RIGHT NEAR THE BLURAY DRIVE!
Go back to ps3 follow theses steps now:
Spoiler:
OPEN REBUG TOOLBOX, AND BROWSE FOR "REWRITE TARGET ID IN FLASH"SHOULD LOOK LIKE THIS!: Click To View What It Looks Like On The PS3
A COUPLE OF WARNING BOXES WILL POP UP, CLICK YES ON BOTH!
CONVERT YOUR LVL2 KERNAL TO DEX"SHOULD LOOK LIKE THIS Click To View What It Looks Like On The PS3
YOU ARE NOW ON DEX ( debug ) 4.21 firmware
NOW TO GET ONLINE WITH 4.50ita!
Spoiler:
VIDEO IF NEEDED!
DOWNGRADE 4.21 DEX TO 3.55 DEX!USE THIS .PUP TO DOWNGRADE!\
3.55 DEX PS3 Downgrader
INSTALL PS3ita 4.50USE THIS .PUP TO INSTALL 4.50ita!
4.50ita DEX
INSTALL PS3ita MANAGER!PS3ita Manager
OPEN PS3ita MANAGER A.) WHEN OPENED, PRESS START
B.) GO TO NETWORK TOOLS
C.) RESTORE ORIGINAL CONSOLE ID
D.) QUIT PS3ita AND SIGN IN!
Credits
EREKTROTTER ( CEX2DEX 4.21 TUTORIAL! )FinalFantasyXIV ( Making The Downloads For OFW 3.55 and PS3ita 4.50 DEX )mango_knife ( Making a Video On How To Sign In With PS3ita ) Last edited by mastakiller; 01-25-2014 at 04:14 PM. Reason: Clean it up
