Recently I started using a Wireless mouse for ease of access, and getting around. I developed a problem when using it that after you unplug or remove adapter, the touch pad doesn't work. I did some research and used basic knowledge and found out how to resolve this issue.
First go to Main.cpl
After you have been prompted with a box like this
Make sure that TouchPad is highlighted, if it is not do it now.
Now that you have done that go to device settings and hit "Enable"
This will now fix that problem, make it so you can use both at the same time.
Hope this Helped some, Drop a Like if it did.
First go to Main.cpl
After you have been prompted with a box like this
Make sure that TouchPad is highlighted, if it is not do it now.
Now that you have done that go to device settings and hit "Enable"
This will now fix that problem, make it so you can use both at the same time.
Hope this Helped some, Drop a Like if it did.
